Filter
Sale!

Cisco WAP131 Wireless-N Dual Band Access Point

KSh23,000.00 EXCL. TAX

Cisco WAP131 Wireless-N Dual Band Access Point

Cisco WAP131 Wireless-N Dual Band Access Point Cisco Small Business WAP131 – Wireless access point – 802.11b/g/

Category: Tag:
Description

Cisco WAP131 Wireless-N Dual Band Access Point

The Cisco WAP131 Wireless-N Dual Band Access Point from Cisco provides a simple way to extend secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees and can scale to accommodate additional users and changing business needs. The Cisco WAP131 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The Gigabit Ethernet port allows the AP to be powered by PoE switch to help reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth, sensitive traffic for voice-over-IP (VoIP) and video applications. The Cisco WAP131 Wireless-N Dual Radio Access Point is easy to setup and use, with intuitive wizard-based configuration. An easy-to-use desktop design with an integrated stand allows you to place the AP on your desk vertically or horizontally. To enhance reliability and safeguard sensitive business information, the Cisco W AP131 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1x RADIUS authentications help keep unauthorized users out.

  • 802.11n connectivity for 2.4 and 5 GHz clients
  • Single Power over Ethernet (PoE) Gigabit Ethernet for connecting to PoE switch
  • PD port allows access point to be powered by backbone switch
  • Concurrent dual-band radio support for up to 300 Mb/s per radio to maximize capacity and coverage
  • Single Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network
  • Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information
  • Simple installation and intuitive web-based configuration and wizard enable fast, simple deployment, and setup
  • Desktop design with integrated stand, for easy access and placement
  • Intelligent QoS prioritizes network traffic to help keep critical network applications running
  • Power-saving sleep mode and port control features help maximize energy efficiency
  • Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network
  • Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
In the Box
Cisco WAP131 Wireless-N Dual Radio Access Point with PoE
  • AC Power Adapter
  • Ethernet Network Cable

Cisco WAP131 Specs

General
StandardsIEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling TypeCategory 5e or better
AntennasInternal antennas optimized for desktop installation with vertical orientation
LED IndicatorsPower, WLAN, LAN
Operating SystemLinux
Quality of Service (QoS)Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
System MemoryRAM: 128 MB
Flash: 128 MB
Minimum RequirementsSwitch or router with PoE support, PoE injector, or AC power adapter
Web-based Configuration: Java-enabled web browser
Interfaces
Ports10/100/1000 Ethernet, with support for 802.3af/at PoE, Power Port for AC adapter
Power SupplyExternal 12 V, 1.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE
ButtonsReset button, Power (on/off), Push button
Cable Lock SlotSlot for Kensington lock
LEDsPower, Wireless, Ethernet
Network
VLAN SupportYes
Number of VLANs1 management VLAN plus 8 VLANs for SSIDs
802.1X SupplicantYes
SSID-to-VLAN MappingYes
Auto Channel SelectionYes
Spanning TreeYes
Load BalancingYes
IPv6IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2 Features802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
Security
WPA/WPA2Yes, including Enterprise authentication
Access ControlYes, management access control list (ACL) plus MAC ACL
Secure ManagementHTTPS
SSIDYes
Performance
Wireless ThroughputUp to 300 Mb/s data rate (real-world throughput will vary)
Recommended User SupportUp to 32 connective users, 16 active users per radio
Configuration
Web User InterfaceBuilt-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management
Management ProtocolsWeb browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote ManagementYes
Event LoggingLocal, remote syslog, email alerts
Network DiagnosticsLogging and packet capture
Firmware UpgradeFirmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)DHCP client
IPv6 HostYes
Wireless
FrequencyDual concurrent radios (2.4 and 5 GHz)
Radio and Modulation TypeDual radio, orthogonal frequency division multiplexing (OFDM)
WLAN802.11n
2×2 multiple-input multiple-output (MIMO) with 2 spatial streams
20 and 40 MHz for 802.11n
PHY data rate up to 600 Mb/s
Data Rates Supported802.11a/b/g:
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mb/s

802.11n: 6.5 to 300 Mb/s
20 MHz Bandwidth: MCS 0-15 for supported data rates
40 MHz Bandwidth: MCS 0-15 for supported data rates

Frequency Band and 20 MHz Operating ChannelsA Regulatory Domain:
2.412 to 2.462 GHz; 11 channels
5.180 to 5.240 GHz; 4 channels
5.745 to 5.825 GHz; 5 channels

E Regulatory Domain:
2.412 to 2.472 GHz; 13 channels
5.745 to 5.805 GHz; 4 channels

Nonoverlapping ChannelsMaximum Channels:
@2.4 GHz; 802.11b/g; 802.11n; 20 MHz: 3
@5 GHz; 802.11a; 802.11n; 20 MHz: 9
@5 GHz; 802.11a; 802.11n; 40 MHz: 3
Wireless IsolationWireless isolation between clients
Internal AntennasInternal fixed PiFA antenna
Antenna Gain In dBiMaximum antenna gain of 3.4 dBi on 2.4 GHz
Maximum antenna gain of 4.5 dBi on 5 GHz
Wireless Distribution System (WDS)Yes
802.11i SecurityYes
Multiple SSIDs8
Wireless VLAN MapYes
WLANYes
Wi-Fi Multimedia (WMM)Yes, with unscheduled automatic power save
Operating Modes
Access pointAccess Point mode, WDS Bridging, Workgroup Bridge mode
Environmental
Power OptionsIEEE 802.3af/at Ethernet switch
Cisco Power Injector: SB-PWR-INJ2-xx (not included)
AC Adapter: Included 12 V, 1.5 A
PoE Peak Power: 7.42 W
ComplianceSafety:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1

Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 301.489-1 and -17 (Europe)

Operating Temperature32 to 104°F / 0 to 40°C
Storage Temperature-4 to 158°F / -20 to 70°C
Operating Humidity10 to 85% non-condensing
Storage Humidity5 to 90% non-condensing
Physical
Mounting OptionsDesktop
Dimensions6.7 x 6.7 x 1.4″ / 17.0 x 17.0 x 3.6 cm
Weight0.89 lb / 0.40 kg

Related products

Cisco Wireless Access Points

Cisco Wireless-N Access Point Power Over Ethernet WAP121

KSh15,000.00 EXCL. TAX
Add to cart
Sale!

Cisco Wireless Access Points

Cisco Aironet 3602 Series Access Point (AIR-CAP3602-A-K9)

KSh74,000.00 EXCL. TAX
Add to cart
Sale!

Cisco Wireless Access Points

Cisco Aironet 1602e IEEE 802.11n 300 Mbps Wireless Access Point AIR-SAP1602E-A-K9

KSh53,800.00 EXCL. TAX
Add to cart